Oil pipeline installation construction and construction work with reinforced pavement

Oil pipeline installation in the construction of road construction including construction belt reinforcement, reinforcement should be carried out in close to the side of the highway with the construction work, in the clean-up, to work with compaction treatment, can guarantee the construction machinery and equipment used, after the loose soil than by water and lots of long-term soak location by mechanical level, put on a layer of geotextile, manud 300 mm soil compaction, the geotextile folded lap in the first layer of the soil, and then the mechanical cushion wet soil of 200 mm, and the spreading soil compaction machine.
The construction work and construction road connectivity of highways, need to make full use of existing roads, to reduce the amount of Engineering construction.
Construction of the pavement to be flat, with sufficient bearing strength, can ensure the running safety of construction equipment. The construction of the road width of 6 meters, the turning radius of the bend is more than 18 meters, the connection between the construction work zone and road pavement to smoothly connected with the trunk road.
In the paddy field or underground high water area for the building, on the both sides of the road construction of temporary embankments, and between the road and embankment construction of drainage ditch, embankment size according to the local circumstances, to be communicated with the drainage ditch drainage system of the original. If the memory in paddy water, to pump the water drainage to the embankment outside the building of the pavement after drying.
At the same time, the construction of pavement will enter the venue and pile pipe completely repaired, for connecting parts of road and highway, the need to take effective measures to protect the road and shoulder. If there is a roadside ditch, need water buried culvert.